Case Studies

Have you bought products or services from WireFlow and want us to write a Case Study about your project?

Contact us at info@wireflow.com.

CASE | WireFlow Data Loggers

Data logging at Forsmark
nuclear power plant

Lundby is a standard system that not only fulfills our high demands, but also provided by a reliable supplier that will secure long term development and maintenance.

CASE | WireFlow Integration Services

Donsö EV-Battery Reuse
and Recycling System

A WireFlow Bifrost Battery Test & Measurement solution for Stena Recycling which is a part of the goal to ensure that batteries can be repurposed, remanufactured, or recycled at the end of their life.

CASE | WireFlow Integration Services

SSPA Upgrades MDL

SSPA is a maritime consultancy company hosting unique testing facilities for physical validation of ship models.  WireFlow’s assignment were to develope the software framework controlling the hardware from National Instruments.

CASE | WireFlow Integration Services

Validation System for Biometric ID Chip

Our client needed a fast and reliable test system for both manual characterizations as well as for automatic regression testing. Together with our client, WireFlow has created a platform with the ability to adapt and scale with the company’s innovations and short development cycles.

CASE | WireFlow Integration Services

Seatwirl

We developed a control and monitoring system for a vertical and floating Wind turbine for Deep Sea Deployment. The ambition was to provide the most cost-effective product for the production of renewable energy. 

CASE | WireFlow Integration Services

Battery Cycle Test Rigs, A Solution for long term test and qualification of Li-Ion batteries

Micropower builds modular Li-Ion battery packs and chargers for a wide range of applications such as automotive, utility vehicles and mobile storage solutions.

They needed a safe, reliable and flexible test solution that could cycle battery packs unattended for many months, while logging large amounts of measurement data from the DUT (device under test).

CASE | WireFlow

High-Speed Stimuli Generator for Engine Ignition systems

SEM is one of the world’s leading producers of electronic ignition systems and engine control systems. WireFlow created a system that allows the technicians at SEM to select predefined engine cycles using a touch-screen.

CASE | WireFlow

Acticon uses LabVIEW™ for data acquisition in their Air and Acoustic Technology Laboratory

Acticon used products from National Instruments and services from WireFlow in order to quickly set up a data acquisition system for evaluation of ventilation products in their air and acoustic technology laboratory.

CASE | WireFlow Integration Services

WR Controls uses LabVIEW and NI platforms for measurement and data acquisition in R&D development

This case study describes how companies such as WR Controls uses products from National Instruments in order to quickly set up data acquisition systems adapted to a different test of a variety of products.

CASE | WireFlow Consulting

Radar test and verification solution based on FlexRIO and LabVIEW FPGA

UniqueSec is an innovative company that develops advanced signal processing algorithms for small-scale commercial radars. In the process of creating a prototype implementation of ASGARD1, UniqueSec needed a partner to assist during product development and decrease time to market.

CASE | WireFlow Consulting

Extending the capability of VeriStand with a “Custom Device”

A Wireflow customer, working in the automotive segment, wanted the possibility to stream UDP-data in both directions between the VeriStand-system and the remote devices. This meant that they needed support for this in their VeriStand platform, and they turned to WireFlow for help.

CASE | WireFlow Integration Services

Production Tester for Battery Management Systems

This study describes how WireFlow could help a client by taking full responsibility for design, development and launch of a complete production test setup. 

CASE | WireFlow Integration Services

ECU Prototype Test System for Thermal Power Control

Azelio is working on new ways to store renewable energy, so it can be made available when it is most needed. They combine the well-known Stirling engine, with an innovative Thermal Energy Storage using the phase changing characteristics of a metal alloy, to recover the energy during the dark hours. During the development they needed a flexible testbed for RnD and validation.

CASE | WireFlow Custom Electronics

Sensor Simulation for ADAS Testing

Advanced Driver-Assistance Systems (ADAS) are introducing new challenges for the automotive industry. To verify that ADAS functions are safe before being used on the road, extensive testing must be performed in lab environment. WireFlow was contacted by a world leading car manufacturer to investigate the possibility to simulate multiple parallel IMUs over high speed Serial Peripheral Interfaces (SPI). By using National Instruments CompactRIO System on Module (SOM) together with LabVIEW FPGA, WireFlow was able to develop such an IMU simulator.

CASE | WireFlow Consulting

Continuous Development of Test and Validation Lab at Company Developing Biometrics

The customer in this study is a market leading manufacturer of biometric sensors found in millions of phones all over the world. Testing and validation were performed in an ad hoc manner, as was the implementation of the test platform.

CASE | WireFlow Custom Electronics

Enabling Maritime Sensor Fusion Inventions

This study describes a project that WireFlow executed for a client who developed a new generation of maritime sensors built on MEMS-technology, rugged form factor, computational power and high-end sensor fusion algorithms. They wanted to do it fast, and they wanted WireFlow to design the systems backbone.

CASE | WireFlow Consulting

Quality Assurance of Massive LabVIEW SCADA System

A supplier of machinery for the energy industry who was developing a massive SCADA system in LabVIEW, felt they needed to get assurance that the system was of good quality and was ready for 24/7 operation before delivery to the end customer.

CASE | WireFlow Integration Services

Charge and Test System for Li-Ion Battery

Toyota Material Handling Manufacturing Sweden is one of the world’s largest factories for manufacturing of warehouse trucks. Toyota was in progress of introducing a new generation of Li-Ion batteries for their trucks and needed new charging and test stations for the battery manufacturing line.

CASE | Battery Test & Measurement Systems

Vinga Cycle Rig System –

A Battery Testing Solution for Brompton Bicycle

Brompton Bicycle builds one of the most iconic foldable commuter bikes and is Britain’s largest bike producer. Upon introduction of their first electric bike to the market, they needed a top-of-the line battery testing solution. Initially, the requirement was to test three packs, but the solution had to be scalable for easy upgrade to up to ten packs…

Have you bought products
or services from WireFlow and want us to write a case study about your project?

Contact us at info@wireflow.com.